I wanted my day use it to bring my bike (Suzuki GSX600F) about the technical approval.
But what's the first place so beautiful it is different and as you think.
early in the morning so I got to the hall Mopped and off to the technical approval. The
Tüvprüfer looking at the bike short, even light tested and says to me "I'm sorry, but I can not give any new badge!"
completely shocked I tell him that the tires have more than minimum profile and I'll always new when I find someone who gives me the right advice for the new tires. The vehicle's registered letter tires Gibts not live longer.
But he just smiles and says "Nope, the tires are ok." Show me then the pads are not even on it is NEN mm.
Oops, I idiot. I wish I had time after seeing previously. Aber in meinem Reifen-Wahn hab ich wohl alles andere als unwichtig angesehen. :(
Pech gehabt! Keine Plakette.
Aber ich kann ja mal eben neue Bremsbeläge holen und wechseln, dann wieder zum Tüv und gut ist.
Ich also bei Suzuki neue Bremsbeläge geholt. 80€ im Zubehör kosten die höchsten 60€, aber ich möchte ja Tüv haben und endlich wieder Mopped fahren.
Zurück zur Halle und den rechten Bremssattel demontiert. Kurz angeschaut und Bremsbeläge wechseln war kein Thema. Benötigte Zeit ~30min. Super ich schaffs noch zum Tüv.
Also schnell die linke seite auch noch gewechselt.
Leider war der "Belagstift" fest. Das ist der Stift, der den Bremsbelag quasi fest hält. After another 1.5 h for hours, I gave up then. To get rid not.
First soak overnight in Caramba and tomorrow we go to the safe.
The next day I then tried my luck again. Without success. The base pin moves no mm. Me remains nothing choice but to disassemble the brake caliper. (With the help of a vice
went out pretty easily, but unfortunately it is the lining pen went on it and I needed a new
Unfortunately Saturday and was the Suzuki dealer, by 13 clock I was there at 13:10 clock...
Monday I'll be there again. Unfortunately, I'm too late on the radio that the highway is blocked and all surrounding land / highways nothing more about. I have about 2 hours required for a route I'm going else in 25-30 min. The surface
pen has cost only 5 € and the seals for the caliper € 17.40. Yesterday I got
then everything back together and made the right opportunity NEN brake fluid change. The whole me then tasted again just under 2 hours, but at least slow down my mopped again and I can before the 1st of April again Tüv and spare me the stupid emission inspection for at least's bike.
Bottom Line: I once just changed the brake pads. It took only ~ 1 week. :)
