
The SdKfz 251 based on the half-track truck SdKfz 11 and was built in the Model A in 1938. Overall, nearly 16,000 were SdKfz 251 in all variations from the tape. It was the standard vehicle of the armored infantry and could find drivers, radio operators and commanders hold up to 10 soldiers. Here is Part 1 of the Zusammebau the Trident SdKfz 251 / 6 command tanks with FuG 11 and loop antenna.
The kit consists of plastic parts which are from the SdKfz 251 Ausf D. The tub and the structure are in a resin parts.

Unfortunately, the instructions not very useful. To attach the side Belche have to help themselves as it is not out of the instructions shown. Ausßerdem you miss the FUG11 which we will add the spare parts box.

Only the resin parts require some time since the runners are set to visible later. So we cut them slightly out from the component and plan, then use fine sandpaper.


Here, all components in place before the Assembly:

For simplicity, the plastic parts are glued together with super glue. This Resinoberteil and bottom fit together well, they must be adapted in any event prior to bonding. The recordings for the chain drives are a few millimeters too narrow and therefore have the chain drive is the plastic pins are removed in order to stick it directly to the photographs.

After the assembly (which takes about 45 minutes) issue in part 2 to the painting of the SdKfz 251 / 6 of Trident .